Mold Inspection Cost – Don’t Be Left in the Cold With Mold Again

If you’re wondering how to perform a mold inspection in your home, the process can be confusing at best. But if you understand the process and what to look for, it doesn’t have to be. Getting rid of mold is not difficult but there are several steps that need to be taken to ensure your home is mold-free. Read on to learn more about how to perform a mold inspection properly so you don’t waste your time and money.

A key component of a mold inspection is moisture control. By assessing the level of moisture in your home, you can see if the proper moisture control measures need to be implemented. Moisture is the number one factor in mold growth and must be eliminated or kept within regulated levels. Whether you have visible mold or invisible mold contamination, moisture control is the most important component of a mold inspection. High levels of moisture cause many health problems and some people are allergic to mold.

To perform the mold inspection, it’s important to assess the level of moisture in the area you are inspecting. One way to check moisture is by using a handheld moisture meter, which is available at most home stores. If the meter shows a high level of moisture, you should inspect the area for new home construction, leaky plumbing or flaking paint. If the meter shows low levels of moisture, then the area should be lightly moistened prior to new home construction or remodeling, and any areas of concern should be mitigated before beginning work.

Mold is most often found in the crawlspace or under the house where the building meets the soil and/or ground conditions. If you detect mold in these areas, you should test for indoor air quality using either a room air purifier or by testing the air alone. If mold is present, then it is likely that there is also mold in the walls, floors, ceiling, insulation, cabinets, electrical systems and sub-floors. It can also be found in basements and attics as well as behind appliances, sinks, ceilings, cupboards and other non-accessible areas. Mold can become a serious problem because it reproduces rapidly, and it is possible to unknowingly spread mold within the house or property. Therefore, it is very important that an air quality test be performed on a regular basis, and this step should always be followed when beginning to consider or plan for mold removal.

Whether you plan to hire a professional mold inspection service or decide to perform the testing yourself, having specific experience in the field is critical. Mold remediation requires specialized expertise because the specific characteristics of the material to be tested (like the density and porosity) and the mold’s typical growth pattern (how plants grow) are very different from each other. Therefore, a mold inspector who has specific experience in the field will be able to more accurately determine how to accurately assess the mold’s growth or “size” based on the specific material being tested.

Mold inspectors typically perform a mold inspection in one of two ways: wet or dry. Wet inspections refer to mold detection in areas where water is involved (for example, flooding or poorly drained plumbing) or areas where the presence of water is not recommended (such as around sinks, showers and toilets). For wet mold inspections, a visual inspection is typically recommended. This means: visual inspection only, mold testing if there is visible mold. However, mold detection in places like bathrooms, kitchens, laundry rooms, or attics with visible mold is recommended for a dry mold inspection. In cases where visible mold is present, mold removal needs to be done in order to ensure that the mold is removed and the affected area is free from any future mold spores.

Mold testing involves: visual observation and visual confirmation. Inspectors perform a visual inspection and take samples. They send the samples to a lab and then wait for the samples to be tested by a certified mold inspector. Once the results are in, the inspectors will discuss the results with the seller and/or builder. The purpose of these inspections is to uncover possible water damage that could lead to new home building problems or new home purchase problems, and to prevent further mold issues from developing. Mold removal is one of the final tests/checks of a new home purchase or long-term rental.

Mold inspections and mold remediation are often a requirement during the life of a new house or long-term rental agreement. If you’re purchasing a new house, ask your real estate agent which mold inspectors they use. If you’re looking to rent an apartment, be sure to check with the property management company that you’re going with. Professional mold inspectors and industrial hygienists are responsible for the integrity of your indoor air quality. They make homes safe and healthy for everyone inside the home and for those who live or work nearby.

Check also for more information.